Description
• Maximum doors per controller – 4 completely independent configurable outputs
• Up to 50,000 users
• Up to 500 doors
• 8Mb on board memory
• Standard configuration will allow “connect and go” installation
• Unique, on board, dynamic current
• Each output can utilise a 12V DC output for a lock or a volts free relay for managing an external system
• Lock circuits are protected from back emf’s, no diodes are required at lock
• On Board capability to interlock 2/3/4 doors on the same controller
• Doors can be set in toggle mode
• Non volatile memory – board retains memory indefinitely in power outage
• Typical authorisation time <0.5s
• 11v-14V Input
• Network – Full duplex, 3 wire
• Connects to network or Computer via patch cable (RJ45)
• LED’s on controller indicate active outputs and network traffic
• Available either as bare board or mounted in a steel cabinet 5amp PSU
• Board Dimensions 153 x 187mm (with connectors in place) 35mm deep with spacer
• Real-time clock, maintains controller time in the event of local power loss
• On board power supply for clock backup
• Audit trail on board, non-volatile memory holds up to 2000 events
• Relay rated 3a @ 30V DC
• Inputs for egress buttons, door contacts + 4 user definable
• Cover label black with white text.
• Separate text adjacent each terminal
• Controller operation continues in absence of PC/network
• Opto isolators protection against external high voltages
• Inwe power supply includes deep discharge protection








